'
' PicAxe + Twitter thermometer!
' v0.1, by Stelios M. (steliosm@steliosm.net)
'
' Notes: In the main section you need to indicate
' your Username/Password for your twitter account.
'
'



main:
  '
  ' Read the values from the DS18B20 and push them out the serial port to the SimpleLan module.
  ' A small python script will post the data to Twitter!
  '
  ' Turn on the LED
  high 1
  gosub read_temp
  ' Remember to set your Twitter Username/Password
  serout 4, t2400, ("!AT0WBM:<SET_USERNAME>:<SET_PASSWORD>:Temperature is around ", #b0, " celcious deegres.",13)
  serout 4, t2400, ("!AT0WBI:<SET_REMOTE_IP", 13)
  serout 4, t2400, ("!AT0SB")
  low 1
  ' Pause for 1 min before sending another update
  ' You might need to adjust this and avoid beign spammed
  pause 60000
  ' Do the whole thing again!
  goto main

read_temp:
  '
  ' Read the temperature value and store it into b0 variable
  '
  readtemp 2, b0
  return